Crandall Filling Machinery > Top Fill Fillers > A1, A2, A4 - Pail Fillers for Metal, Glass, Plastic or Box Bag from pint to 6 US Gallons
Range of Products:
The A1, A2 and A4 models are available for gravimetric filling of non-foaming liquid and semi-liquid products which do not contain hard solid particles. The product contact parts are available in Brass and Steel (standard), 316 Stainless Steel, 304 Sanitary Stainless Steel, PVC, Teflon Composite and Titanium to meet a wide range of product requirements.
Range of Containers:
Models are available for filling any free standing metal, glass, plastic or bag in the box containers from pint to 6 US gallons( 500 ml. to 25 ltr).
Filling Speed:
Speed is governed by the viscosity of the product, product line pressure and size of the container opening. Approximate speeds, based on the gravity filling of water from a 10ft. gravity head tank into open top containers are as follows:
|
Containers / Hour
|
||||
|
Container
|
500 ml / 1 liter pint / quart
|
4 liter / 1 Gallon
|
8 liter / 2 Gallons
|
20 liter / 5 Gallons
|
| Model: | ||||
| A1/10 PEX | 600 | 350 | 240 | |
| A1/25 PEX | 350 | 240 | 120 | |
| A2/10 PEX | 1200 | 700 | 480 | |
| A2/25 PEX | 700 | 480 | 240 | |
A1/25 PEX Electronic "A" Top Filling MachineThe A1 models are available for gravimetric filling of non-foaming liquid and semi-liquid products which do not contain hard solid particles. The product contact parts are available in Brass and Steel (standard), 316 Stainless Steel, 304 Sanitary Stainless Steel, PVC, Teflon Composite and Titanium to meet a wide range of product requirements. |
|
| |
|
A1/25 MTX "A" Top Filling MachineThe A1, A2 and A4 models are available for any non-foaming food, petroleum or chemical product which will flow, settle out in the container and does not contain hard solids. Machines available in Brass and Steel (standard), 316 Stainless Steel, Sanitary Stainless Steel, Titanium, or PVC product contact parts to suit a wide range of products. For foaming products, see AF, F and EF series fillers. |
|
| |
|
